Advertisement
Quick Links
Advertisement
Related Manuals for Gotharman zaTurn
Summary of Contents for Gotharman zaTurn
- Page 1 Gotharman’s zaTurn Modular Synthesizer Update Manual 6.38...
-
Page 2: Table Of Contents
Table of Contents Bug Fixes............................... 3 zaTurn PolyTouch ..........................4 Vothar8 Filter Board ..........................5 Multi Filter Board ..........................6 Filter Frame Sequencer ........................8 Module Quick Jump Buttons ........................ 9 Output Module Pan Modulation......................10... -
Page 3: Bug Fixes
Bug Fixes -When selecting effects in LINK poly mode, this would not always work as expected. This has now been fixed. - +/- modulation select on Oscillator B did not work. This has now been fixed. -Sequencer Note Tracks Layer B would always be recorded in mono mode, regardless of the settings. -
Page 4: Zaturn Polytouch
PolyTouch Because of the current global part shortage, some parts that were needed to produce zaTurn became unavailable. The display was among these parts. So in order to be able to still produce these, I had to redesign it. -
Page 5: Vothar8 Filter Board
-The distortion at higher input levels is gained a little. zaTurn can hold the tunings for up to 4 analog filter boards, and it will show on the Preset Select page, which filter board were installed, when the preset was saved, to make it easier to work with several different filter boards. -
Page 6: Multi Filter Board
When highpass is selected, the HPF goes into the LPF in serial. zaTurn can hold the tunings for up to 4 analog filter boards, and it will show on the Preset Select page, which filter board were installed, when the preset was saved, to make it easier to work with several different filter boards. - Page 7 The new switches are located on the VCF Inputs page:...
-
Page 8: Filter Frame Sequencer
Filter Frame Sequencer Some changes have been made to the Filter Frame Sequencer, to make it easier to use. On the G-Ray/Frame page Edit Knobs 5 to 8 now adjust the Cut and Reso settings for the selected frame, so that you no longer have to jump back and forth between this page and the first filter page, for setting these parameters. -
Page 9: Module Quick Jump Buttons
Module Quick Jump Buttons When using the Module Quick Jump buttons to jump between the modules, zaTurn would always jump to the first page of the module. It will no longer do this. Now it will just jump to the page that... -
Page 10: Output Module Pan Modulation
Output Module Pan Modulation The 2 pan modulation parameters in the Output module have been moved one step to the right, so that Edit Knob 7 and 8 are now used for the pan modulation. This seems a bit more logical, than using Edit Knob 6 and 7. - Page 11 Written by Flemming Christensen 2022...
Need help?
Do you have a question about the zaTurn and is the answer not in the manual?
Questions and answers