Advertisement
Getting Started
PC-086 Troubleshooting Guide
PC-086 Troubleshooting
This Troubleshooting Guide walks you step-by-step through the
diagnosis of PC-086 customer problems. It is important to follow these
steps carefully, to ensure that the problem is diagnosed correctly, and
therefore the appropriate repair action is taken.
To begin:
1. Unplug the chair, wait approximately five seconds, then plug it
back in.
2. Verify that the chair is receiving power by pressing a button on the
control panel to ensure the corresponding LED lights. If the LED
does not light, see
3. If the problem still exists, choose from the following issues:
To Troubleshoot This
Issue
My chair will not
recline/incline
The wave function is
not working properly /
is noisy
The jade/heat is not
working
"Power" on page
2.
Do the following:
"Electric Recline" on page 3
See
"Wave" on page 3
See
NOTE: The jade stones heat slowly, and the heat
automatically turns off after 30 minutes, as this is
the recommended duration.
If the chair does not heat after several minutes,
replace the backrest pad.
.
.
1
Advertisement
