Table of Contents
Advertisement
Aligning the washer-dryer
The washer-dryer must stand perfectly
level on all four feet to ensure safe and
proper operation.
Incorrect installation may increase
electricity and water consumption and
may cause the washer-dryer to move
about.
Screwing out and adjusting the feet
The 4 adjustable feet are used to level
the washer-dryer. The appliance is
supplied with all feet screwed in.
Using the open spanner supplied,
turn counter nut 2 in a clockwise
direction. Then turn counter nut 2
together with foot 1 to unscrew.
11975871-00
Use a spirit level to check the
washer-dryer is standing level.
Hold foot 1 securely with a pipe
wrench. Turn counter nut 2 again
using the open spanner supplied until
it sits firmly up against the casing.
Risk of damage from incorrectly
aligned washer-dryer.
There is a danger of the washer-
dryer moving about if the feet are not
secured.
Turn all 4 counter nuts for the feet
until they sit firmly up against the
casing. Please also check this for the
feet which did not need adjustment.
Installation
Advertisement
Table of Contents
