Specifications - Mackie 1402 VLZ Owner's Manual

SPECIFICATIONS

Main Mix Noise
20Hz–20kHz bandwidth, 1/4" Main out, channels 1–6 Trim
@ unity gain, channel EQs flat, all channels assigned to
Main Mix, channels 1 and 3 Pan left, 2 and 4 Pan right.
Main Mix fader down, channel faders down: –100.0dBu
Main Mix fader unity, channel faders down:
(90dB Signal-to-Noise Ratio, ref +4dBu)
Main Mix fader @ unity, channel faders @ unity: –84.5dBu
Total Harmonic Distortion (THD)
1kHz @ +14dBu, 20Hz–20kHz
Mic in to Main out: 0.0025%
Attenuation (Crosstalk)
1kHz relative to 0dBu, 20Hz–20kHz
bandwidth, Line in, 1 ⁄ " Main Out, Trim @ unity
4
Main fader down:
Channel Alt / Mute switch engaged:
Channel fader down:
Frequency Response
Mic input to any output
20Hz to 60kHz:
20Hz to 100kHz:
Equivalent Input Noise (EIN)
Mic in to Insert Send out, max gain
150 ohm termination:
Mackie Designs is always striving to improve our mixers by incorporating new and improved
materials, components and manufacturing methods. Because we're always trying to make things
better, we reserve the right to change these specifications at any time, without notice.
Common Mode Rejection (CMR)
Mic in to Insert Send out, max gain
1kHz:
Maximum Levels
Mic in:
–86.5dBu
Tape in:
All other inputs:
Main Mix XLR out:
All other outputs:
Impedances
Mic in:
Channel Insert return:
All other inputs:
Tape out:
–85dBu All other outputs:
–84dBu
EQ
–83dBu
High Shelving:
Mid Peaking:
Low Shelving:
+0dB/–1dB
Power Consumption
+0dB/–3dB
Fuse Rating
120V:
–129.5dBm unweighted
220–240V:
14" (35.6cm)
better than –90dB
+14dBu
+16dBu
+22dBu
+28dBu
+22dBu
1.3 kilohms
2.5 kilohms
10 kilohms or greater
1.1 kilohms
120 ohms
+/–15db @ 12kHz
+/–12dB @ 2.5kHz
+/–15db @ 80Hz
120VAC, 50/60Hz, 25 watts
500mA slo blo, 5 x 20mm
250mA slo blo, 5 x 20mm
2.9"
(7.4cm)
WEIGHT
9.5 lbs.
(4.5 kg.)
33