Maintenance - Panasonic ER-RP40 Operating Instructions Manual

Professional facial hair trimmer
Hide thumbs Also See for ER-RP40:
Table of Contents

Advertisement

Maintenance

• Make sure that the main body is turned off.
• Be sure to clean the appliance with the battery cover
attached.
• The blade can't be disassembled.
Wet cleaning
1� Remove the blade and attachments (See pages 12
and 16) and rinse under running water.
• Cover the drainage outlet of washbasin to prevent the
blade from flowing away.
• If you are concerned about the dirt, wash it off with
hand soap or the like.
2� Shake up and down several times to remove the water�
• Be careful not to hit the main body on the sink or any
other object while draining the water. Failure to do so
may cause malfunction.
3� Wipe off the water with a towel and let it dry naturally.
• It will dry faster with the blade removed.
Dry cleaning
Brush off any remaining hair
trimmings�
Notes
• Do not use thinner, benzine, alcohol
or other chemicals.
Doing so may cause failure, cracking or discoloration of
the main body. Wipe the main body only with a soft cloth
slightly dampened with tap water or soapy tap water.
• After cleaning, attach the blade and the protective cap.
• Store the main body in a place with low humidity after
use. Failure to do so may cause malfunction due to
condensation or rust.
15

Advertisement

Table of Contents
loading

Table of Contents