HIKVISION C30 Series User Manual page 14

Video Wall Controller • User Manual
Basic Control
Set basic parameters.
 Eye Protection: Turn on to filter blue light. Please operate according to the requirement.
 Brightness Adjustment: When turned on, the screen will automatically adjust the screen
brightness according to the ambient brightness. Please operate according to the requirement.
Set Image Adjustment. Adjust the color temperature and color standard of the screen as required.
(Optional) Check Batch Configuration to apply the setting to other receiving cards.
Click OK.
Manuel Correction
Set the correction parameters to keep the screen brightness and color of different cabinets
consistent.
Enter Video Wall Configuration → Decoding Output. Select LED sending card in the Output List
(Example of naming the LED sending card: LEDSendCard_Board19_1). Right-click and select
Advanced Configuration.
Click Correct → Manuel Correction. Check Enable Correction.
8