Table of Contents
Advertisement
Video Wall Controller • User Manual
2. According to the cabinet number on site, click the frame on the right to connect the sending card
with the cabinet screen.
3. Click OK.
The following figure shows an example: The sending port numbered 1 is connected to the cabinet
screen numbered 1-1 and 1-2 from left to right.
Set Connection
Enter Video Wall Configuration → Decoding Output. Select LED sending card in the Output List
(Example of naming the LED sending card: LEDSendCard_Board19_1). Right-click and select
Receiving Card Status.
The following figure shows an example: The receiving card has 2 sending ports. Blue means that
the receiving card is in normal state. On the right, users can view the video wall size, screen type,
receiving card type, version and other information.
5
Advertisement
Table of Contents
