Linear AM-SEK User Manual page 2

IMPORTANT ANNOUNCEMENT
The information contained in this document is the property of Nortek Security & Control LLC, and is supplied for the sole
purpose of operation and maintenance of products of Nortek Security & Control LLC. No part of this publication is to be
used for any other purposes, and it is not to be reproduced, copied, disclosed, transmitted, stored in a retrieval system,
or translated into any human or computer language, in any form, by any means, in whole or in part, without the prior
explicit written consent of Nortek Security & Control LLC.
Published by Nortek Security & Control LLC. Toll-Free: (800) 421-1587. Website:
Copyright © 2021 Nortek Security & Control LLC. Linear and GTO are trademarks of Nortek Security & Control LLC. All
rights reserved.
All other product names referenced herein are registered trademarks of their respective companies.
This document is intended to provide customers with brief descriptions on the product and to assist customers to get
started. For detail information and operations of the product, please refer to www.linear-solutions.com.
FCC NOTICE
We, Nortek Security & Control LLC of 5919 Sea Otter Place, Carlsbad, CA 92010, declare under our sole responsibility
that the device, ACP00964 complies with Part 15 of the FCC rules.
This equipment has been tested and found to comply with the limits for a Class A digital device pursuant to Part
15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and radiates radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications.
Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be
required to correct the interference at his own expenses.
A shielded-type power cord is required in order to meet FCC emission limits and also to prevent interference to the
nearby radio and television reception. It is essential that only the supplied power cord can be used.
Use only shielded cables to connect the device's RS-232 or RS-485 port.
Be cautioned that changes or modifications not explicitly approved by Nortek Security & Control could void your
authority to operate the equipment.
www.nortekcontrol.com
2