About The Influence On Other Electric Appliances; About The Internet; Others; Factory Reset - Panasonic HD-PLC DA-PU100 Administrator's Manual

Plc adaptor
Hide thumbs Also See for HD-PLC DA-PU100:
Table of Contents

Advertisement

About the influence on other electric appliances

Symptom
Noises entering the
shortwave radio /
lighting fixtures with a
dimming function and
touch lamps do not
work.
The product of another
specification does not
work.

About the Internet

Symptom
Cannot connect to the
Internet.

Others

Symptom
The PLC adaptor is
warm or hot.

Factory Reset

This function will erase all of the settings in this product and initialize it to the factory default settings.
1. Connect the product to a power source.
2. Press and hold the CLEAR button for more than 3 seconds
When initialization starts, PLC indicator, LAN indicator, MASTER indicator blinks, then each
indicator goes out.
When the PLC indicator, the LAN indicator, and the MASTER indicator are all illuminated,
initialization is complete.
Note
After the indicators light, wait at least 30 seconds before terminating power to the product.
Possible Cause
This product may affect shortwave
radio, lighting fixtures with a dimming
function and touch lamps.
This product may affect other types of
PLC adaptor.
Possible Cause
"HD-PLC" network is not connected.
Not connected to the Internet.
Possible Cause
It is not abnormal.
(There are times when it will feel a bit
hot in summer compared to winter)
DA-PU100 Series Administrator's Manual
Please connect these electric
appliances to another outlet or use as
far away from this product as possible.
Keep the short-wave radio antenna or
main unit away from the wall. If noise
still enters, switch the frequency of the
shortwave radio to another frequency.
Connect PLC adaptors of a different
type to another power outlet or use as
far away from this product as possible.
Check that the PLC indicator of all
adaptors in the same network turns on
green. If the PLC indicator is lit in
orange, refer to the explanation of the
problem (page 31).
Please connect the PC and the router
etc. directly with the LAN cable and
check whether you can connect to the
Internet. If you cannot connect, please
check the connection set up by PC or
router.
If it is abnormally hot, unplug the power
plug and consult your dealer.
61
Remedy
Remedy
Remedy

Advertisement

Table of Contents
loading

Table of Contents