Impax IM-TIG200 Instruction Manual page 21

UNPACKING
Caution! This packaging contains sharp objects.
Take care when unpacking. Remove the
machine, together with the accessories
supplied, from the packaging. Check carefully to
ensure that the machine is in good condition
and account for all the accessories listed in this
manual. Also make sure that all the accessories
are complete. If any parts are found to be
missing, the machine and its accessories should
MMA ASSEMBLY
WARNING
ELECTRIC SHOCK can kill.
Keep the electrode holder and
cable insulation in good
condition.
Do not touch electrically live parts or
electrode with skin or wet clothing.
Insulate yourself from work and ground.
Turn the input line switch on the welder
"OFF" before connecting or disconnecting
output cables or other equipment.
Output Connections
Electrode polarity
In general when using manual arc welding
electrodes the electrode holder is connected the
the positive terminal and the work return to the
negative terminal. Always consult the electrode
manufacturer's data sheet if you have any
doubts.
When using the machine for TIG welding the TIG
torch should be connected to the negative
terminal and the work return to the positive
terminal.
MMA Welding
Insert the cable plug with electrode holder (not
supplied) into the "+" socket on the front panel
of the welding machine, and tighten it
clockwise.
Insert the cable plug of the earth clamp into the
"-" socket on the front panel of the welding
machine, and tighten it clockwise (Fig.1)
be returned together in their original packaging
to the retailer.
Do not throw the packaging away, keep it safe
throughout the guarantee period, then recycle if
possible, otherwise dispose of it by the proper
means. Do not let children play with empty
plastic bags due to the risk of suffocation.
Fig 1
Earth Clamp
20
10 0.2
AMPS PULSE HZ
200 200
Panel
Remote
1 0
POST GAS DOWN
5S
10
ARC FORCE SLOPE
Electrode Holder