Cobra microTALK PR3000DXC Owner's Manual page 7

Using Your Radio
Main Icons
Operation
Intro Operation Customer
Volume
Volume Knob
Assistance
To adjust the volume:
1. Rotate the On/Off Volume knob.
Intro Operation
Call Button
Call Button
To alert another person that you are calling:
Main Icons
Secondary Icons
1. Press and release the Call button.
The other person will hear a two second call
Secondary Icons
tone. You cannot send or receive transmissions
during the two second call tone.
Intro Operation
Notice
Notice
Selectable High•Low Power Output
Hi•Low Button
When in close proximity to another party or
Secondary Icons during favorable conditions, you can switch
from High to Low Power to extend battery life.
Hi Power Icon
Notice
Low Power Icon
To switch from high to low power:
1. Press and release the Hi•Low button.
When in high power and using Channels
1 through 7 and 15 through 22, the Hi icon
will be visible on the display.
When in low power and when using Channels
8 through 14, the Low icon will be visible on
the display.
Display Illumination
Light/Max Range
To illuminate your display:
1. Press and release the Light/Max Range button
to illuminate the display for 10 seconds.
English
4
Warranty
Customer Warranty
Assistance
Customer Warranty
See page 14 on how to select
Assistance
between 10 call tone settings.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
Introduction
Auto Squelch/Maximum Range
•
Your microTALK ®
which automatically shuts off weak transmissions and
unwanted noise due to terrain, conditions or if you've
reached your Maximum Range limit.
•
You can temporarily turn off auto squelch or turn on
Secondary Icons
maximum range extender, allowing all signals to be
received and extending the maximum range of your radio.
Light/Max Range
•
Lock Function
The Lock button locks the Channel, Mode and
Hi•Low Power buttons to prevent accidental operation.
Lock Button
Lock Mode
•
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
radio is equipped with Auto Squelch,
To temporarily turn off auto squelch:
1. Press the Light/Max Range button less
than five seconds.
If you hear two beeps, you have turned
Notice
the maximum range extender on (see below).
To turn maximum range extender on:
1. Press and hold the Light/Max Range
button for at least five seconds until you
hear two beeps which indicates the
maximum range extender is on.
To turn maximum range extender off:
1. Press and release the Light/Max Range
button or change channels.
To turn the lock button on or off:
1. Press and hold the Lock button for
two seconds.
A double beep sound is used to confirm your
lock on or off request. When in Lock mode,
the Lock icon will be displayed.
Nothing comes close to a Cobra
Warranty
•
•
™ 5