Cobra microTALK PR3000DXC Owner's Manual page 12

Mode Functions
Operation
Intro Operation Customer
VibrAlert ® and Call Tones
Assistance
Your microTALK ® radio can alert you to incoming signals by
sounding an audible call tone, by vibrating silently or both.
To change call settings:
Mode Button
1. Press the Mode button until
the Call Setting icon flashes
Secondary Icons
on the display. The current
setting (vibrate + ring,
Channel Button
vibrate only or ring only)
is displayed.
2. Press the Channel Up or
Channel Down button to
Notice
change the call setting.
3. Choose one of
the following:
a. Press the Mode button
to enter the new setting
and proceed to other functions.
b. Press the Lock button to enter the new
setting and return to Standby mode.
10 Call Tone Settings
You can choose between 10 different Call Tone settings to transmit
a unique call alert.
To change a call tone setting:
Mode Button
1. Press the Mode button until the letter "C" and
the current call tone Number (01 through 10)
is displayed.
2. Press the Channel Up or Channel Down
Call Tone Setting
button to hear the other call tone settings.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and proceed to other functions.
Channel Button
b. Press the Lock button to enter the new
setting and return to Standby mode.
14 English
Warranty
VibrAlert ® + Ring
VibrAlert ® Only
Ring Only
Introduction
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the Talk
button. This alerts the other party that you are finished talking and
it is OK for them to speak.
Mode Button
Secondary Icons
Roger Beep On
Channel Button
Keystroke Tones
With Keystroke Tones turned on, your radio will sound beeps
each time you press a button or change a setting.
•
Mode Button
Keystroke Tones On
Channel Button
Operation
Customer Assistance Warranty
Intro Operation Customer
Assistance
To turn Roger Beep on or off:
1. Press the Mode button until the
Roger Beep icon flashes on the display.
The current on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to select roger beep on or off.
3. Choose one of the following:
Notice
a. Press the Mode button to enter
the new setting and proceed to
other functions.
b. Press the Lock button to enter
the new setting and return to
Standby mode.
To change keystroke tones:
1. Press the Mode button until the Keystroke
Tones icon flashes on the display. The current
on or off setting is displayed.
2. Press the Channel Up or Channel Down
button to turn keystroke tones on or off.
3. Choose one of the following:
a. Press the Mode button to enter the new
setting and return to Standby mode.
b. Press the Lock button to enter the new
setting and return to Standby mode.
Nothing comes close to a Cobra
Warranty
•
•
™ 15