Page 1
Subordinate New Brand 1. Features Product adopt the widely used 2.4GHz wireless technology with the features of low power consump�on, long signal transmi�ng and strong an�-interference, etc. This product has auto-transmi�ng and auto-synchronizing func�on. Widely used on the controlling of hotel ligh�ng and home ligh�ng.
Page 2
2. Dynamic mode table selec�on Select dynamic mode table 1: The light is powered off for 10 seconds and then powered on. Within 3 seconds, press the " S+ " bu�on 5 �mes, the blue light blink 3 �mes slowly, indica�ng successfully. Select dynamic mode table 2: The light is powered off...
Page 3
3. Signal transmi�ng One light can transmit the signals from the remote control to another light within 30m, as long as there is a light within 30m, the remote control distance can be limitless. 4. Modes synchroniza�on Different lights can work synchronously when they are started at different �mes, light by the same remote, under same dynamic mode and within 30m distance.
Page 4
Unlinking Code Instruc�ons Power Light Power Light Link / Unlink bu�on Switch off light, a�er Short press " I " bu�on Lights blink 10 �mes 10 seconds then 5 �mes within 3 seconds quickly means unlinking switch on again. when light on. is done successfully.
Page 5
7. DMX512 LED Transmi�er Link /Unlink Compa�ble with DMX512 LED Transmi�er (Purchase separately) Choose the zone for the light by pressing “ + ” or “ - ” (e.g. “CH12” means zone 12) Link/Unlink bu�on Power Light Power Light Link Switch off...
Page 6
9. Scan QR code to watch video instruc�on Smartphone app control Third party voice control (WL-Box1 video) 10. The mode of “Do Not Disturb” It can be ac�vated or turned off via remote control Turn on “Do not disturb” (wide using in the area which have power failure frequently to save energy) Press “OFF”...
Page 7
11. PUSH dimming Short press push switch: Long press push switch: Turn on or turn off light. Stepless dimming brightness. Long press / release and long press again to increase or decrease brightness. 12. A�en�on 1. Please check whether the voltage of the power supply is in accordance with the light, and please check the connec�on of both the cathode and anode, otherwise the light will be broken.
Need help?
Do you have a question about the Miboxer FUT035P and is the answer not in the manual?
Questions and answers