Table of Contents
Advertisement
s Keep the directions for washing
agent and laundry care agent
→ Page 31 at.
Pull out the detergent drawer.
1.
Fill with detergent.
2.
→
"Detergent drawer", Page 19
If desired, fill with a care product.
3.
Slide the detergent drawer into the
4.
appliance.
13.8 Starting the program
Remark: If you want to change the
time until the program end, first set
the ready-in time.
on Start/Refill to press.
▶
a The drum rotates and a
load recognition takes place, which
can take up to 2 minutes, after
which the water flows into the
device.
a The display shows whether the program
duration or the ready-in time is
displayed.
a After the program end, it shows
display: "-0-".
13.9 Soaking laundry
Remark: No additional detergent is
needed. The soapy water is then used
for washing.
Start the program.
1.
To pause the program, after about
2.
10 minutes, press Start/ Refill.
To resume the program after the
3.
desired soaking time, press
Start/Refill.
13.10 Adding laundry
Press Start/Refill.
1.
The device pauses.
The Ministry in essence NL
Remark: When
it is not possible to add laundry.
When
goes out, then the refill
washing of laundry possible.
Open the appliance door.
2.
Reload or remove the laundry.
3.
Close the appliance door.
4.
Press Start/Refill.
5.
13.11 Program Cancel
on Start/Refill to press.
1.
Open the appliance door.
2.
At high temperature and high
water level, the appliance door
remains locked for safety reasons.
– Start the program at a high
temperature To rinse.
– Start the program at a high
water level Centrifuge
or select a suitable program for
draining.
→ "Programs", Page 26
Remove the laundry
3.
→ Page 33 .
13.12 Resume program at
rinse hold
The program Centrifuge or select a
1.
suitable program for draining.
→ "Programs", Page 26
Press Start/Refill.
2.
13.13 Take out the laundry
Open the appliance door.
1.
Remove the laundry.
2.
13.14 Switching off the device
Turn the program selector on from to make.
1.
Close the water tap.
2.
appears
33
Advertisement
Table of Contents
