Table of Contents
Advertisement
OPTIONAL FEATURES
CAUTION
Do not clean glass shelves or covers with warm
water when they are cold. Shelves and covers
may break if exposed to sudden temperature
changes or impact, such as bumping.
Tempered glass is designed to shatter into
many small, pebble-size pieces. This is normal.
Glass shelves and covers are heavy. Use both
hands when removing them to avoid dropping.
CAUTION
To avoid personal injury or property damage,
handle tempered glass shelves carefully. Shelves
may break suddenly if nicked, scratched, or
exposed to sudden temperature change.
Shelf Adjustment
Refrigerator shelves are easily adjusted to suit
individual needs. Before adjusting the shelves,
remove all food.
To adjust sliding shelves:
1. Remove shelf by pulling forward to stop
position.
2. Lift front edge up and pull out.
To replace shelf, rest side edges on any pair of shelf
rails and carefully push shelf back into position.
Sliding Glass Shelf
Sliding Wire Shelf
16
To adjust slide-under/flip shelf:
1. Pull front half shelf forward until its back
drops down, then gently push front half
shelf back and under back half shelf.
2. With front half fully below back half, lift
front of shelf to flip it upwards toward the
back of the cabinet.
2
Slide-Under/Flip Shelf
Door storage
Door bins, shelves, and racks are provided for
convenient storage of jars, bottles, and cans.
Frequently used items can be quickly selected.
The dairy compartment, which is warmer than
the general food storage section, is intended for
short term storage of cheese, spreads, or butter.
Door rack
Some models have door racks or bins that can
accommodate gallon-sized plastic drink containers
and economy-sized jars and containers.
To remove door rack:
1. Push on rack sides to release from locking tabs.
2. Pull straight out.
To install door rack:
1. Push rack straight ahead.
2. You will hear the sides lock into the tabs.
Door Rack
1
Advertisement
Table of Contents
