Power Connection - Nevir NVR-CB4P User Manual

Power Connection

WARNING: This appliance might not require Electrical
connection¡ Check if your current model just operates by gas
This appliance should be installed and connected correctly according to
the manufacturer's instructions and by the authorised service.
The electrical connections of the appliance should only be made with
(grounded) sockets with a grounding system that is laid in accordance
with the rules. Contact an authorised electrician if there is no suitable
socket for the grounded system where your appliance will be placed. The
manufacturer is absolutely not responsible for the damages caused by the
ungrounded sockets connected to the appliance.
Your appliance should ground the plug; make sure the plug socket is
grounded. The plug should be placed within reach after installation.
Your appliance is manufactured in accordance with 220-240 V AC 50-
60 Hz. electrical supply. If your power network does not provide these
specifications, contact an electrician or an authorised service.
Do not allow the power cord of your appliance to contact hot parts of the
appliance. Keep it away from sharp edges and corners.
13