Electrical Connection - Nevir NVR-CB5PH User Manual

GB

Electrical Connection

WARNING: Oven may not require Electrical connection¡ Check your current
model
1.
Your oven requires 16 or 32 Ampere fuse according to the appliance's
power. If necessary, installation by a qualified electrician is recommended.
2.
Your oven is adjusted in compliance with 220-240V AC/380-415V AC
50/60Hz.electric supply. If the mains are different from this specified value,
contact your authorized service.
3.
Electrical connection of the oven should only be made by the sockets with earth
system installed in compliance with the regulations. If there is no proper socket with
earth system in the place where the oven will be placed, immediately contact a
qualfied electrician. Manufacturer shall never be responsible from the damages
that will arise because of the sockets connected to the appliance with no earth
system. If the ends of the electrical connection cable are open, according to the
appliance type, make a proper switch installed in the mains by which all ends can be
disconnected in case of connecting / disconnecting from / to the mains.
4.
If your electric supply cable gets defective, it should definitely be replaced
by the authorized service or qualfied electricians in order to avoid from the
dangers.
5.
Electrical cable should not touch the hot parts of the appliance.
6.
Please operate your oven in dry atmosphere
Electrical connection scheme
.
Neutral
Neutre
Live
Earth
Phase
Terre
Erdung
H05 VV-F 3G 4 mm²
220-240V~50/60Hz
16
Neutral
L3
Neutre
L2
Earth
L1
Terre
Erdung
H05 VV-F 5G 1.5 mm²
380-415V 3N~50/60Hz
L2
Neutral
Neutre
Earth
L1
Terre
Erdung
H05 VV-F 4G 1.5 mm²
380-415V 3N~50/60Hz