Table of Contents
Advertisement
2
3
PS mode and Quality Settings
• The SHQ, HQ, and SQ settings can be used. (The RAW and TIFF setting cannot be used.)
Note
• The maximum number of sequential shots which can be taken using the burst mode increases to
seven in the PS mode.
• In the PS mode, up to six memory gauge bars are lit. (One memory gauge bar indicates one shot
image in the buffer.) After taking a seventh shot, the memory gauge starts blinking. If the memory
gauge is blinking, you cannot continue shooting.
• Smear can occur when you are taking a picture in a bright place, for example, under a bright sky.
• Colors may be blurred, or jaggies may appear, along angled lines in the shot image.
2
3
4
5
4
Control panel
On the arrow pad, press
to move the green highlight to
(or
/
).
(To jump to the above icon, press
On the arrow pad, press
move the green highlight to PS
mode.
Press the
button.
The PS mode is selected, and the green
highlight moves to
.
(To cancel the setting, press the menu
button
instead of the
Press the
button again to close the menu.
Check that the record mode
indicator is blinking and the
icon is displayed in the control
panel.
The record mode may have been
changed.
5
or
first.)
to
5
button.)
81
Advertisement
Table of Contents
