Setting the Switching Photocell
The desired switching light level must now be arrived at, either by waiting for an appropriate time of day or by a
combination of manually switching off lights and perhaps masking windows. Using the QuickSet Pro, enter the
Utilities menu and select 'LightSpot/MLS/LCM' then 'IR Remote'. Scroll down to 'Scene 1' and press and hold
the 'OK' button to store. The luminaire(s) will blink to acknowledge a successful store operation
Testing
Detectors can be put into a temporary 10-second Off Delay mode to speed the process of checking their
sensitivity and range settings using the QuickSet Pro's Walk Test option (found under Utlities). This mode
expires automatically after a few minutes.
Dimensions
Technical Data
RECOMMENDED MAXIMUM MOUNTING HEIGHT: 3.0m
RANGE: Cone-shaped detection pattern, diameter (at floor level) = 2.8 x mounting height
7.0m
OPERATING VOLTAGE: 12V DC, SELV if installed correctly.
PHOTOCELL: Regulating
DEPTH REQUIRED BEHIND CEILING (FLUSH VERSION):
62mm from front flange plus an allowance for the minimum bend radius of the patch lead.
WEIGHT: 251g (surface version); 243g (flush version)
COLOUR: White (RAL9010)
MATERIAL: Flame retardant PC/ABS
IP RATING: 2X
OPERATING TEMPERATURE: 0 C to 40 C
Part Numbers
MLS2401CDR
MLS2401CDRSM
BT5E030GY
BT5E050GY
BT5E100GY
EU contact for regulatory questions: PEHA Elektro
GmbH & Co.KG Gartenstraße 49,58511 Lüdenscheid
Germany Web: www.peha.de
Honeywell
St Marks Court, North Street Horsham, West Sussex
RH12 1BW Tel: +44 (0)1942 719229
Web: www.ex-or.com
MLS2401CDR
62mm deep
behind ceiling
100mm
2.5m
o
o
360º Microwave Presence Detector with Photocell, Flush Mount
360º Microwave Presence Detector with Photocell, Surface Mount
3m Detector Patch Lead
5m Detector Patch Lead
10m Detector Patch Lead
MLS2401CDRSM
Flange:
15mm deep
100mm
62mm
deep
At the end of their useful life
the packaging and product
should be disposed of via a
suitable recycling centre.
Do not dispose of with normal
household waste.
Do not burn.
W4412I