Repair Instruction
9. Water Probe Assy Disassembly and Reassembly Advise
To disassemble Water Probe Assy from boiler, use an industrial standard wrench tool with the size of 12mm to
avoid damaging the nut. Use the same wrench tool for reassembly after servicing.
Step 1: Detach Water Probe Assy wire from Terminal.
Step 2: Use wrench tool (12mm) to disassemble nut of Water Probe Assy
Published by Philips Consumer Lifestyle
Document No. : CSW-07-081-18028
For internal use only
Page 30 of 32
GC9610 – GC9650