Prime TNIDP12 Instructions

Prime TNIDP12 Instructions

Ez-set indoor digital timer

Advertisement

Quick Links

EZ-SET INDOOR
DIGITAL TIMER

STEP 1 - Set the time

• Plug in the timer and let it
charge for 30 minutes.
• Use the up (
) and
CTD
down (
) arrow to set the
current time.
Cus tom
ON
5pm-12am
5am-8am
STOP
PLUG IN THE TIMER AND MOVE TO STEP 2
ADDITIONAL FEATURES

CUSTOM COUNTDOWN:

• Press "CTD".
• Press up (
) and down (
) arrow to set the
countdown from 1 minute to 24 hours.
(Note: "CTD" will flash on LCD to indicate the
countdown feature is active)
MODEL #TNIDP12
PROGRAMMING INSTRUCTIONS
Congratulations! You have purchased the easiest to
use timer on the market today. In three steps or less,
your timer will be ready to use.
1. Set the time.
2. Choose a preset option.
3. Set a custom on/off time.

STEP 2 - Pick a preset option

• Press one or more of the
preset options that meet your
needs.
On
• When the button lights up
Off
the timer is set (timer must
be plugged in for buttons to
illuminate).
• If you would like a custom
on/off time, move to Step 3.
If not, the setup of your new
EZ-SET timer is FINISHED!
5pm-8am

MANUAL ON/OFF OVERRIDE:

• Press "On/Off" to bypass the current setting and turn
your device On or Off.
(Note: Timer settings will resume based on the next
programmed cycle)
On
CTD
Off
Cus tom
ON
5pm-12am
5pm-8am
5am-8am
On to step 3
CTD
Cus tom
ON
5pm-12am
5pm-8am
5am-8am
STEP 3 - Set a Custom
CTD
On/Off Time
• Hold down "Custom ON"
and press the up (
) and
down (
) arrow to set the
ON time.
• Hold down "Custom OFF"
CTD
and press the up (
) and
down (
) arrow to set the
Cus tom
OFF time.
ON
• Ensure the timer is still
plugged in.
Press, BUT DO NOT HOLD DOWN,
the "Custom On" and "Custom Off" buttons.
5am-8am
Buttons will turn blue when the program
is activated.

IN CASE OF POWER FAILURE

Timer will continue to operate on battery backup if the
power goes out; however it will not turn attached devices
on or off. Once power is restored, programming will
resume. If power remains out longer than the battery
backup will operate, re-program the timer as explained in
Steps 1, 2 and 3 of the "Programming Instructions".
NOTE: Battery is permanently installed and not
replaceable. It automatically recharges when power is
provided to the timer.
On
Off
Cus tom
ON
On
Off
5am-8am
5pm-12am
5pm-8am
5pm-12am
5pm-8am
02-11272017

Advertisement

Table of Contents
loading
Need help?

Need help?

Do you have a question about the TNIDP12 and is the answer not in the manual?

Questions and answers

Summary of Contents for Prime TNIDP12

  • Page 1 MODEL #TNIDP12 PROGRAMMING INSTRUCTIONS EZ-SET INDOOR DIGITAL TIMER Congratulations! You have purchased the easiest to use timer on the market today. In three steps or less, Cus tom your timer will be ready to use. 1. Set the time. 2. Choose a preset option.
  • Page 2 RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Looking for dependable home electrical? Rely on Prime for quality and long-lasting products.

Table of Contents