Power supply
Check whether the mains voltage of the power
supply matches the mains voltage available at
the setup location. This product complies with
the voltage type specified on the product.
The power outlet shall be installed near the
product and shall be easily accessible.
CAUTION!
Always use the
projector off.
Turn off the product and unplug from the
power outlet before cleaning the surface
(see Cleaning, page 20). Use a soft, lint-
free cloth. Never use liquid, gaseous or easily
flammable cleaners (sprays, abrasives, polishes,
alcohol). Do not allow any moisture to reach
the interior of the product.
DANGER!
Risk of eye irritation or damage!
This product is equipped with a laser
light source, which emits very bright
light. Do not look directly into the
projector lens during operation. This
could cause eye irritation or damage.
Laser safety
This machine contains a laser module. For your
safety, follow these safety instructions when
using the projector.
WARNING! LASER RADIATION�
Risk of eye damage.
•
The product is classified as CLASS 1 laser
product according to IEC/EN60825-1: 2014.
•
Do not look directly at the bright light
emitted by this machine, otherwise it may
cause permanent eye damage.
•
Do not open or disassemble the machine,
which may cause damage due to exposure
to laser radiation.
•
Do not use some optical instruments (such
as magnifying glass and microscope for
experiments) to observe the laser output,
otherwise eye injury may be caused.
•
Wear professional laser protection glasses
when there is a need to have direct contact
with bright light.
General safety information
button to turn the
•
As with any bright light source, do not stare
into the beam, RG2 IEC 62471-5:2015.
•
When turning on the projector, make sure
no one within projection range is looking
into the lens.
•
For your safety, please select the right
viewing direction.
Viewing direction
Screen
5