During Operation; Starting The Machine; Using The Self-Propel Drive; Recycling The Clippings - Toro Flex-Force Power System 60V MAX 21in Recycler 21326 Operator's Manual

During Operation

Starting the Machine

1. Ensure that the battery pack is charged and installed in the machine; refer to
(page 12).
2. Insert the electric-start button into the electric starter switch (A of
3. Squeeze the blade-control bar and hold it to the handle (B of
4. Press the electric-start button and keep it pressed until the motor starts (C of

Using the Self-Propel Drive

•
To engage the self-propel drive, pull the
self-propel-drive bar to the handle and hold it
(Figure 10).
Note:
The maximum self-propel-drive speed is
fixed. To reduce the speed, increase the space
between the self-propel-drive bar and the handle.
•
To disengage the self-propel-drive, release the
self-propel drive bar.
Note:
To reduce the ground speed, increase the
space between the self-propel drive bar and the
handle.

Recycling the Clippings

Your machine comes from the factory ready to recycle the grass and leaf clippings back into the lawn.
If the grass bag is on the machine, remove it before recycling the clippings. Refer to
(page 15).
Figure
Figure
Figure 9
1. Self-propel-drive bar
14
Installing the Battery Pack
9).
9).
Figure 9).
Figure 10
Removing the Grass Bag
g332149
g240765