Sony STR-DN1050 Help Manual page 153

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Adjusting the volume for zone 2 (Volume) (for STR-DN1050 only)
You can adjust the volume for zone 2 using the following procedure in the following cases:
When using the connections described in
When using the connections described in
[Lineout] for zone 2 is set to [Variable].
1. Select [Settings] - [Zone Settings] from the home menu.
2. Select [Volume].
3. Select the volume level.
Note
If [Lineout] for zone 2 is set to [Fixed], adjust the volume using the receiver in zone 2.
Hint
You can also adjust the volume using ZONE CONTROL and MASTER VOLUME on the receiver while [2. xxxx (input
name)] is shown on the display panel.
"Connecting the speakers in zone 2 (for STR-DN1050
"Connecting another amplifier in zone 2 (for STR-DN1050
4-488-938-11(3)
Copyright 2014 Sony Corporation
only)."
only)," and when
222