Sony STR-DN1050 Help Manual page 123

Help Guide
MULTI CHANNEL AV RECEIVER
STR-DN1050/STR-DN850
Outputting a test tone from each speaker (Test Tone)
You can output a test tone from each speaker in sequence.
1. Select [Settings] - [Speaker Settings] from the home menu.
2. Select [Test Tone].
3. Select the setting you want.
Off
Auto: The test tone is output from each speaker in sequence.
L, C, R, SR, SL, SB (*), SBL, SBR, FHL, FHR, SW: You can select which speakers will output the test
tone.
*
[SB] appears when only one surround back speaker is connected.
4. Adjust the speaker level.
Hint
To adjust the level of all speakers at the same time, press
receiver.
The adjusted value is shown on the TV screen during adjustment.
+/–. You can also use MASTER VOLUME on the
4-488-938-11(3)
Copyright 2014 Sony Corporation
192