Table of Contents
Advertisement
− The battery may not be inserted before making any adjustments to the
product, changing fitted parts, or storing the power tool.
Removing the battery
1. Press and hold the unlock button of the battery which is being used (see Fig. B).
2. Remove the battery from the battery holder
If the battery cannot be removed easily, this means that the battery re-
lease button has not been pressed enough. Press the unlock button of
the battery in more firmly.
Inserting the battery
1. To insert the battery, slide it into the battery holder
soon as the battery clicks into the lock (see Fig. C).
2. Check that the battery is positioned securely.
The product has undervoltage detection. If the battery is empty, the
product switches itself off.
Inserting/changing the saw blade
The saw blade holder enables the saw blades to be replaced without tools. Saw
blades can therefore be replaced quickly.
CAUTION!
Risk of injury!
The saw blades are very sharp. Also, the saw blades can become hot during
sawing. Both of these issues can lead to injuries if you do not handle the product
carefully.
− Be extremely careful when changing the saw blade.
− Wear protective gloves when changing the saw blade.
1. Turn and hold the saw blade lock
2. Remove any saw blade that is inserted.
3. Push the shank of the saw blade
into place. The saw blade serration must face in the cutting direction.
4. Release the saw blade lock.
5. Check that the saw blade is positioned firmly in place. Make sure that the saw
blade cannot slip out of the saw blade holder.
9
.
anti-clockwise (see Fig. D).
4
6
into the saw blade holder
9
. You will hear a click as
7
until it clicks
Operation
17
Advertisement
Table of Contents
