Panasonic DMR-ES16PC Service Manual page 21

Mode name
Aging Perform sequence of modes as * Aging
Description shown below continually.
Demonstration Ejection of the disc is prohibited.
lock/unlock The lock setting is effective until unlocking the
tray
initialization" of service mode.
ATP Initialization ATP setting is initialized, and the unit turns off
automatically.
Progressive initialization The progressive setting is initialized to
Interlace.
Item
Description
Aging Contents (Example):
and not released by "Main
FL display
Display following the then mode.
*When lock the tray.
unit
"LOCK" is displayed for 3 seconds.
*When unlock the tray.
"UNLOCK" is displayed
seconds.
*When press OPEN/CLOSE key
while the tray being locked.
Display "LOCK" for 3 seconds.
It is same with display in stop mode. When the power is on (E-E mode),
The display before execution
leaves.
21
DMR-ES16PC / DMR-ES16PL
Key operation
Front Key
When the power is ON, press
[STOP], [POWER]
[OPEN/CLOSE] simultaneously for
over 5 seconds and less than 10
seconds.
NOTE1:
If Unit has not turned into Aging
mode by operations shown above,
execute TEST MODE once and re-
execute operation shown above.
(*All the main unit's parameters
include tuner are initialized by TEST
mode.)
NOTE2:
If the unit has hung-up because of
pressing keys for over 10 seconds,
once turn off the power, and re-
execute this command.
*When releasing Aging mode, press
[POWER] key.
When the power is on, press
[STOP] and [POWER]
simultaneously for 5 seconds.
When the power is on, press
[STOP] and [POWER]
simultaneously for 5 seconds.
for 3
Press [OPEN/CLOSE] key while the
tray being locked.
press [CH UP] and [CH DOWN]
simultaneously for 5 seconds.
When the power is on (E-E mode),
press [STOP] and
simultaneously for 5 seconds.
and
keys
keys
[PLAY]