Table of Contents
Advertisement
DMR-ES16PC / DMR-ES16PL
Error Code
Diagnosis contents
HARD
Drive error
ERR
IR ERR
IR communication error
No REC
Recording is impossible
SELF
Restoration operation
CHECK
PLEASE
Unit is in termination process
WAIT
UNFORM
Unformatted disc error
AT
8.1.2.
Special Modes Setting
Mode name
TEST Mode
Rating password
Service Mode
Forced disc eject
Forced power-off
The drive detected a hard error.
[IR ERR] is displayed when communication
between
Timer
microprocessor fails.
[No REC] is displayed when recording is
impossible due to the defect, dirt or wound of
media.
Since the power cord fell out during a power
failure or operation, it is under restoration
operation.
*It
will
OK,
automatically. If a display does not disappear,
there is the possibility that defective Digital
P.C.B. / RAM drive.
Unit is in termination process now.
"BYE" is displayed and power will be turned
off.
In case "Quick Start" of setup menu is ON, it
is displayed in restoration operation for AC
off.
You have inserted an unformatted DVD-RAM
or DVD-RW that is unformatted or recorded
on other equipment.
Item
Description
*All the main unit´s parameters (include tuner)
are initialized.
The audiovisual level setting password is
initialized to "Level 8".
Setting every kind of modes for servicing.
*Details are described in "8.1.3. Service
Mode at a glance".
Removing a disc that cannot be ejected.
The tray will open and unit will shift to P-off
mode.
*When Timer REC is ON or EXT-LINK is ON,
execute " Forced disc eject " after releasing
Timer REC or EXT-LINK.
*This command is not effective during "Child
lock" is ON.
While Demonstration Lock is being set, this
Forced disc eject function is not accepted.
When the power button is not effective while
power is ON, turn off the power forcibly.
*When Timer REC is ON or EXT-LINK is ON,
execute "Forced Power-off" after releasing
Timer REC or EXT-LINK.
Description
Monitor Display
"DVD drive error."
No display
microprocessor
and
IR
No display
No display
if
a
display
disappears
No display
FL display
The
display
before
leaves.
Display in P-off mode.
20
Automatic FL display
Display for 5 seconds.
Key operation
Front Key
Press
[STOP],
[CH
[OPEN/CLOSE]
simultaneously for five seconds
when power is off.
Open the tray, and press [REC] and
[PLAY]
simultaneously
seconds.
When the power is off, press [CH
UP], [OPEN/CLOSE] and [REC]
keys simultaneously for 5 seconds.
execution
When the power is off, press
[STOP]
and
[CH
simultaneously for 5 seconds.
Press [Power] key over than 10
seconds.
UP]
and
keys
for
5
UP]
keys
Advertisement
Table of Contents
