MSI K7N420 Pro User Manual page 53

AWARD BIOS Setup
Boot Up Num-Lock LED
Thi s it em al lows you to set th e Nu mLock status when you boot up y our
computer. When you choose from the default of [On], the keypad is numeric
keys; when you choo se [Off], th e keypad is arrow keys. Available o ptions
are [On] and [Off].
Gate A20 Option
This all ows you to set the Gate A20 st atus. When set to [Fast], Gat e A20 is
cont rolled by chipset. Wh en set to [Normal], Gate A20 is cont rolled by a
specific pin from the k eyboard control ler. Available options are [Fast] and
[Normal].
Typematic Rate Setting
This item allows yo u to set the k eystrok es repeat rate determi ned by key-
board controller. When set to [Enabled], the following two items Typematic
Rate and Typematic Delay can be selected. Available options are [Disabled]
and [Enabled].
Typematic Rate (Chars/Sec)
This item allows you to set th e number of t imes a second to rep eat a key-
stroke when you hold the key down. Available options are [6], [8], [10], [12],
[15], [20], [24], and [30]. Default value is [6].
Typematic Delay (Msec)
This item allows you to set the delay time before the key begins to repeat the
keystrok e while holdin g down the key. Available opt ions are [250], [500],
[750], and [1000]. Default value is [250].
Security Option
This item allows you to limit access to the system and Setup program, or just
to Setu p program. When set to [Setup], the system will boot, but access to
Setu p program will be deni ed if t he correct password is not ent ered at the
prompt. When you choose [System], the system will not boot and access to
Setu p program will be deni ed if t he correct password is not ent ered at the
prompt. Avai lable options are [Setup] and [System].
3-11