IDE Primary/Secondary Master/Slave
Press PgUp/ <+> or PgDn/ <-> t o select the hard di sk d rive cat egory. The
specification of hard disk drive will show on the right hand according to your
selection. You can press <Enter> to enter the sub-menu. The sub-menu will
appear as the following example:
Access Mode
Capacity
Cylinder
Head
Precomp
Landing Zone
Sector
Drive A/B
The two items allow you to set the type of floppy drivers installed. Available
options are [None], [360K, 5.25 in], [1.2M, 5.25 in], [720k, 3.5 in], [1.44M, 3.
5in], and [2.88M, 3.5in].
Video
Thi s item allows you to set the type of vid eo card. Available op tions are
[EGA/VGA], [CGA40], [CGA80], and [MONO].
The set tings are CHS,LBA, Large, and Auto
The formatted size o f the storage device
Number of cylinders
Number o f heads
Write preco mpensation
Cylinder location of the landing zone
Number of sectors
3-7
AWARD BIOS Setup