Pioneer WYS Series Disassembly Manual page 11

3. Evaporator
Note: Remove the front panel and electrical parts (refer to 1. Front panel and 2. Electrical parts) before
disassembling evaporator.
Procedure
1) Disassemble the pipe holder located at the
rear of the unit (see
2) Remove the 1 screw on the evaporator
located at the fixed plate (see
Figure 24).
Note: This section is for reference only. Actual unit appearance may vary.
Figure 23).
Illustration
Figure 23
Screw
Figure 24
Pipe Holder
Page 11