VALBERG 12S45 D DXAD701T Instructions For Use Manual page 14

B
Using the appliance
Before using the appliance
Preparing your dishwasher for first use
• Make sure the electricity and supply water specifications match the values indicated in the
installation instructions for the machine.
• Remove all packaging material inside the machine.
• Set the water softener level.
• Fill the rinse aid compartment.
Salt usage (IF AVAILABLE)
• For a good washing function, the dishwasher needs soft, i.e. less calcareous water. Otherwise,
White lime residues will remain on the dishes and the interior equipment. This will negatively
affect your machine's washing, drying and shining performance. When water flows through
the softener system, the ions forming the hardness are removed from the water and the water
reaches the softness required to obtain the best washing result. Depending on the level of
hardness of the inflowing water, these ions that harden the water accumulate rapidly inside the
softener system. Therefore, the softener system has to be refreshed so that it operates with
the same performance also during the next wash. For this purpose, dishwasher salt is used.
• Machine can only be used by special dishwasher salt to soften the water. Do not use any
small grained or powdered type of salts which can easily soluble. Using any other type of salt
can damage your machine.
11 EN