MSI 945 Neo5 Series User Manual page 56

M S-7236 M ainboard
Suspend Time Out (M inute)
If system activity is not detected for the length of time specified in this field, all
devices except CPU will be shut off. Settings: [Disabled], [1], [2], [3], [4], [5], [6], [7],
[8], [9], [10].
Power Button Function
This feature allows users to configure the Power Button function. Settings are:
[Power Off]
[Suspend]
Restore on AC Power Loss
This setting specifies whether your system will reboot after a power failure or
interrupt occurs. Available settings are:
[Off] Leaves the computer in the power off state.
[ On] Leaves the computer in the power on state.
[Last State] Restores the system to the previous status before power
failure or interrupt occurred.
Wakeup Event Setup
Press <Enter> to enter sub-menu and the following screen appears.
Resume From S3 By USB Device
The item allows the activity of the USB device to wake up the system from S3
(Suspend to RAM) sleep state.
Resume From S3 By PS/2 Keyboard
The item specifies how the system will be awakened from power saving mode
when input signal of the PS2 keyboard is detected. Use the <PageUp> &
<PageDown> keys to select the options. W hen selecting [Password], enter the
desired password.
Resume From S3 By PS/2 Mouse
This setting only works Resume From S3 By PS/2 Keyboboard is set to [Hot
Key]. This setting determines whether the system will be awakened from what
power saving modes when input signal of the PS/2 mouse is detected.
3-16
The power button functions as a normal power-off button.
W hen you press the power button, the computer enters the
suspend/sleep mode, but if the button is pressed for more
than four seconds, the computer is turned off.