ABB AC500-eCo Starter-Kit Getting Started page 48

9. Connect the CPU and the S500 module.
Connect the PM554 to 24 V DC;
•
Connect the PM554 onboard inputs and outputs with the power supply;
•
Connect to the COM1of the PM554 to the COM1 interface of the PC with TK503
•
programming cable;
Connect the DX561 (I/Os, with CPU, with power supply);
•
Connect the AI561 (Input, with DX561, with power supply);
•
Connect the AI562 (Input, with AI561, with power supply).
•
Further wiring information of the CPU and the I/O modules please refer to the system data of
the AC500 PLC.
Failure to heed precaution can result in injury to people or product to property.
CAUTION
8. Downloading the program to the PLC
After us wiring the hardware, we can now download the program to the PLC.
First we have to load the program to the controller. To do this, select the menu item
"Online/Login".
When no more Errors and Warning message appear, select the menu item "Online/RUN".
Now you can check your program with the PLC.
____________________________________________________________________________________________________
Getting Started with AC500-eCo Starter-Kit - 48 -