ABB AC500-eCo Starter-Kit Getting Started page 14

In the "Communication Parameters" dialog window, click on the "Gateway" button and then
following the steps below:
Confirm your settings with "OK".
5. Compiling the project.
In order to build the project, select the menu item "Project/Build".
If no errors were detected, the message "0 errors, 0 warnings" is displayed in the message
box.
6. Downloading the program to the PLC
Now we can download the program to the PLC. Change the RUN/STOP switch to the RUN
mode.
First we have to load the program to the controller. To do this, select the menu item
"Online/Login".
____________________________________________________________________________________________________
Getting Started with AC500-eCo Starter-Kit - 14 -