ABB AC500-eCo Starter-Kit Getting Started page 38

1. Open a new project:
OPEN:
First start the AC500 Control Builder
programming software, click
a new project.
Select the CPU type:
Select the program language:
____________________________________________________________________________________________________
Getting Started with AC500-eCo Starter-Kit
to create
Select the desired CPU (in this example
PM554) in the appearing window. Then
in the appearing window click "OK".
The ST Editor is opened.
Keep the settings "PLC_PRG" and
"Program" for the name and the type
for this new POU, select "ST" for the
language of the POU and confirm
with "OK".
- 38 -