Click on the "channel parameters" tab which next to the tab "Base parameters", change the
value "0...10V" instead of "not used". Complete your input by pressing the <Enter> key.
Use the same procedure to configure the analog input of AI562. Only use "Temperature
gathering" for the comment and choose "2 wire NI1000 -50...+150deg" for the value.
5. Opening the ST (Structured Text) editor
From the resources we now want to switch to the structured editor, click on the
tab and then double click on the entry PLC_PRG (PRG). The structured text editor is opened.
6. Organization the program
____________________________________________________________________________________________________
Getting Started with AC500-eCo Starter-Kit
- 42 -