URBANGLIDE ECROSS PRO PO3293 Original Manual page 23

To be able to pull on the
folding handle, the safety must
be removed by pulling on the
buckle on the right.
Adjust the size of your handlebars by
loosening the clamp buckle on the stem.
Be careful not to exceed the height limit
indicated. Check that your handlebars are
stable and that the clamp is tight.
Fold out the handles simply by straightening them.
Check that they are stable before using your
product.
Etapes de montages
Then pull the folding handle to unfold your scooter.
Straighten the stem and raise the handlebars up. Once
fully upright, return the folding handle to its original
position.
To fold your scooter, pull on
the safety buckle.
Then pull the folding handle and lower the
stem to the tray of your scooter. Once
lowered as far as it will go, return the safety
buckle to its original position.
To fold them up, pull the two parts at the base of
the handles. Lower the handles all the way down.
8
Then return the safety buckle
to its original position and
make sure your handlebars are
stable.