A&D HW-G Series Instruction Manual page 25

The percentage mode is to display a mass value in the unit of "%".
It is necessary to store a 100% mass value in advance to use this function.
Step 1 Press the
Step 2 Press the
stores a 100% mass.
Step 3 If necessary, with nothing on the pan press
the
ZERO
Step 4 Gently place the 100% mass onto the pan.
Press the
after the stability mark is displayed. Then the
percentage unit is displayed.
Caution
When the sample is too light and it is not possible
to calculate a 100% mass, the scale displays lo .
and returns to step 3.
Pressing the
ENTER
the next unit is displayed.
Step 5 Remove all items from the pan.
switch to display the unit %.
MODE
switch to enter the mode that
SET
switch to display zero.
switch to store the mass
ENTER
switch after lo is displayed,
HW-G Instruction Manual Page 23
HW-G OZIM v1a