Table of Contents
Advertisement
Working with the notebook
Using the touch screen
You can execute commands as follows:
•
using the stylus pen (supplied with your device).
•
using your fingers
Using fingers
You can execute certain commands by using your finger tip on the touchscreen of your device.
Many things you can be select or activate using your finger tip can also
be selected or activated with the pen.
► To configure the touchscreen for finger input, go to Settings in Windows and
select ettings - Bluetooth & devices - Touch.
Exit power-saving mode under Windows 11 by touching it with your finger
If the device is in power-saving mode, you can reactivate it by double-tapping
the touchscreen with your finger.
► Select this mode from Settings - Bluetooth & devices - Touch - Touch the screen to wake.
Activating this setting, especially when used as a tablet PC with the
screen flipped down, can cause the device to unintentionally return from
power-saving mode due to accidental finger touches.
If this setting is activated, it may result in higher power consumption in power-saving
mode.
Calibrate screen for touch
For information on how to calibrate your device to use the touch screen,
refer to the chapter
Please note: There are separate calibration programs available for calibrating the
stylus pen and for calibrating finger-based operation. Do not use the calibration
tool for the stylus pen to calibrate finger-based operation.
30
"Calibrating the pen", Page
34.
Fujitsu
Advertisement
Table of Contents
