BD Alaris GW 800 Series Quick Reference Manual page 6

1. Switch the pump on.
2. Open the in-line clamp. Ensure no
drops are falling in drip chamber. Prime
infusion set by pressing
displayed, press
all visible air is cleared from the line.
3. Connect the infusion set to the patient
access device. Enter rate using
Press once to confirm rate and scroll
e
to VTBI.
4. Enter VTBI using
flow sensor, VTBI can be
switched off by scrolling until OFF is
displayed. Press
and scroll to VI.
5. If necessary, press
6. Press to start the infusion.
d
0000CF04392 Iss. 1 6/12
. While FILL is
b
again and hold until
b
/
h f
/ , or, if using a
h f
once to confirm VTBI
e
to clear VI.
c
.