BD Alaris GW 800 Series Quick Reference Manual page 3

Symbol Description
ON/OFF button - Press once to switch the Pump on. Press
and hold down for approximately three seconds to switch the
Pump off.
RUN/HOLD button - Press to start the infusion or to put the
infusion on hold.
CLEAR/MUTE button - Press to silence alarm or advisories
for one minute. The audio from the alarm or advisories will
resound after this time. Resets numeric values to zero.
Note: To re-enable the alarm audio press any other
button or key to unmute.
PRIME/BOLUS button - Primes the Infusion set. Administers
bolus during the infusion.
PRIMARY/SECONDARY button - Switches the Pump between
Primary and Secondary infusion modes, if enabled.
ENTER button - Scrolls between rate, time, VTBI and total
volume infused (VI). Enters values for selected infusion
/ configuration parameters. Confirms the rate during an
infusion titration.
CHEVRON keys - Increases or decreases the infusion rate,
TIME limit and VTBI. Press and hold to increase the selection
speed. Used to adjust user selectable options
0000CF04392 Iss. 1 3/12