Memory Locations - Cobra microTALK CXR900 Owner's Manual

Mode Functions
Operation
Main Icons
Intro Operation Customer Warranty

10 Memory Locations

Assistance
Your microTALK ® radio has 10 Memory Locations for storing
your most frequently used channels and channel/privacy code
combinations. These Memory Locations can be selected individually
or can be scanned. (See page 22 for memory location scan.)
To program a memory location:
Intro Operation Customer Warranty
Mode Button
Secondary Icons
Assistance
1. Press the Mode button until the
Memory icon and the memory location
flash on the display.
2. Press the Channel Up or Channel Down
Secondary Icons button to select the memory location
Memory Icon
(0 through 9).
Notice
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
Notice
Channel Button
3. Press the Lock/Enter button to enter
a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.
4. Press the Channel Up or Channel Down
button to select a channel (1 through 22).
Lock/Enter Button
5. Press the Lock/Enter button.
The CTCSS icon and privacy code
numbers will flash on the display.
14
Main Icons
Operation
Introduction
Intro Operation
6. Choose one of the following:
•
a. Press the Channel Up or Channel Down
button to select a CTCSS privacy code
(01 through 38) for the channel.
Intro Operation Customer
Assistance
b. Press the Lock/Enter button to
switch from CTCSS to DCS. The DCS
Secondary Icons
icon and privacy code numbers will
flash on the display. The Channel Up
or Channel Down button can then be
Secondary Icons
used to select a DCS privacy code
(01 through 104) for the channel.
If "OFF" flashes in place of the privacy
Notice
code numbers, a privacy code is
already set in the opposite (CTCSS
Notice
or DCS) system. Press the Channel Up
or Channel Down button to cancel
the opposite code and select a privacy
code from the active system for the
selected channel.
7. Choose one of the following:
a. Press the Lock/Enter button to enter
the channel/privacy code in the selected
memory location. Radio then proceeds to
next Memory location, which will blink.
b. Press the Mode button to
enter the channel/privacy code in
the selected memory location and
proceed to other functions on the
channel/privacy code displayed
before you entered mode functions.
c. Press the Talk button to enter the
channel/privacy code in the selected
memory location and exit mode functions.
Upon release of the Talk button, the
radio will enter Standby mode on the
channel/privacy code just entered.
Customer Assistance Warranty
Customer Warranty
Assistance
Warranty
15