MSI MEGA MPC 915 User Manual page 57

MSI Reminds You...
Enabling the functionality of Hyper-Threading Technology for your com-
puter system requires ALL of the following platform Components:
* CPU:
* Chipset: An Intel
* BIOS:
* OS:
For more information on Hyper-threading Technology, go to:
www.intel.com/info/hyperthreading
reduces end-user response times. The technology treats the two cores inside the
processor as two logical processors that can execute instructions simultaneously.
In this way, the system performance is highly improved. If you disable the function,
the processor will use only one core to execute the instructions. Settings: [Enabled],
[Disabled].
Full Screen Logo Show
This item enables you to show the company logo on the bootup screen. Settings are:
[Enabled]
[Disabled]
Boot Sequence
Press <Enter> and the following sub-menu appears.
1st/2nd/3rd Boot Device
These items allow you to set the sequence of boot devices where AMIBIOS at-
tempts to load the operating system.
MSI Reminds You...
Available settings for "1st/2nd/3rd Boot Device" vary depending on the
bootable devices you have installed. For example, if you did not install a
floppy drive, the setting "Floppy" will not show up.
Boot From Other Devices
Setting the option to [Yes] allows the system to try to boot from other devices if the
system fails to boot from the 1st/2nd/3rd boot device. Settings are: [Yes], [No].
®
An Intel Pentium
®
Chipset that supports HT Technology;
A BIOS that supports HT Technology and has it enabled;
An operating system that supports HT Technology.
Shows a still image (logo) on the full screen at boot.
Shows the POST messages at boot.
4-9
Chapter 4 - BIOS Setup
®
4 Processor with HT Technology;