Setting Up Your C1.2; Safety Notice; Unpacking - CH C1.2 User Manual

2 Setting up your C1.2

This manual will lead you through each step of the installation and set up procedure, in a clear and logical
sequence. Although the operation and options might seem complex, they will quickly become second nature;
However, because of the sheer range of options available it is easy to overlook something unless you
approach set up and configuration in a systematic way. If you take the time to follow the manual, it will
ensure that you become completely familiar with the C1.2's many options and that your DAC/Controller
delivers the best possible performance.

2.1 Safety notice

Like any piece of sensitive audio electronics, there are certain precautions that you should take in handling and
installing your CH Precision C1.2, in order to protect yourself, your new equipment and your system.
Always handle with care. The C1.2 DAC/Controller is surprisingly heavy, so have someone to help you when
unpacking, re-packing or moving it around.
Install your C1.2 on a strong, stable support capable of holding its weight. It is best to clear/prepare the
supporting surfaces in advance.
Do not install your C1.2 near water. Do not expose the unit to any kind of liquid.
Do not install it under direct sunlight or near any heat source, such as a radiator or other apparatus
generating heat.
Do not install it in a confined space and make sure there is sufficient ventilation and airflow around and
beneath the unit.
Do not operate it during periods of high ambient temperature (>40°C) or in extremely high humidity
conditions. Only use options and accessories specified or recommended by CH Precision.
Do not open the units or try to service them yourself. Always refer to a qualified technician for service,
maintenance or upgrades. Failure to do so will void the unit's warranty

2.2 Unpacking

The C1.2's carton is large and contains both the component and all of its accessories. You will need an open,
preferably carpeted area in which to unpack it. Please also ensure that the rack or support space on which the
C1.2 will be placed has been cleared and cleaned before you start. At this point it is also worth ensuring that the
connectors on any interconnect cables are cleaned and that the power to your system is turned off. The carton
consists of an inner box and outer sleeve.
Once you open the inner box, remove Quick Start Guide, Topology Diagram the power cord, the blue suction
cup and the top layer of white foam packaging. Inside you will see the component chassis and various
accessories.
With a helper, carefully lift the C1.2 out of the box and place it to one side. Then carefully remove the plastic
bag in which it is sealed.
Remove the small, brown Accessory Pack and place it with the C1.2. Also remove the four composite leveling/
grounding spikes. These are inserted into the lower foam block and, being white, are easy to miss.
We recommend storing the Accessory Pack in a readily accessible place, so don't put it back in the carton with
the plastic bag when resealing it.
C1.2 User Manual 6