Operation; Front Panel Controls; Front Panel - CH C1.2 User Manual

4 Operation

The C1.2 DAC/Controller can be operated from the front panel, from the IR remote control or from CH Control
Android app. Feedback to the user is provided by a high-definition display with customizable colors. Setup
operations are handled from the front panel or the CH Control Android app.

4.1 Front panel controls

4.1.1 Front panel

1
1. Standby LED
2. User control knob (dual concentric rotatory knob
with push function)
The standby LED lights up when the unit is in standby. It is normally turned-off during operation and lights
briefly whenever it receives a valid IR remote control command. The LED can also be programmed to remain on
during operation. The display is a high-definition 24-bit RGB panel with a very wide viewing angle, high contrast
and high brightness that ensure optimal legibility. The color and brightness of the display can be configured
according to the user's taste/requirements and different colors can be chosen for PCM, DSD, MQA, MQA Studio
or analog input playback.
3 4
Front panel elements
3. IR remote control receiver
4. Display area (high-definition AMOLED display)
C1.2 User Manual
2
14