CH C1.2 User Manual page 18

Following table shows the actions of the user control knob for Shortcuts.
User Control Knob Action
[NP] Normal Push
[LP] Long Push
[C>>] Center Rotate Right
[<<C] Center Rotate Left
[E>>] External Rotate Right
[<<E] External Rotate Left
The PHASE POLARITY Shortcut gives a good illustration of how to navigate a Shortcut screen. Navigating other
Shortcuts is similar.
6
5
1. Shortcut title (Parameter, for other Shortcuts, title
changes accordingly)
2. Arrow indicating External Rotate Right [E>>] if
applies. The item below indicates the next parameter
value (up direction)
3. Next Parameter Value if External Rotate Right
[E>>] is applied (parameter up)
4. Current Parameter Value (for other Shortcuts the
Unit State
Shortcut (except last)
Last Shortcut (SETUP) or
after current Shortcut
has been modified
STANDBY
Any other state
Shortcuts (except last)
Last Shortcut (SETUP)
Shortcuts
Shortcuts (except last)
Last Shortcut (SETUP)
Shortcuts
1
4
PHASE POLARITY Shortcut display elements
C1.2 User Manual
Unit Action
Skip to next Shortcut
Exit Shortcuts mode
(Normal mode)
Wake from STANDBY
Go to STANDBY
Modify parameter up (when available)
Enter Menu mode
Modify parameter down (when available)
Modify parameter up (when available)
Enter Menu mode
Modify parameter down (when available)
current Value of the Parameter is displayed on this
line)
5. Next parameter value if External Rotate Left [<<E]
is applied (parameter down)
6. Arrow indicating External Rotate Left [<<E] if
applies. The item below indicates the next parameter
value (down direction)Bridge)
2
3
18