Advertisement
OPERATION
5. Disconnect all electrical loads from the generator. Never start or stop the generator with
electrical devices plugged in.
6. Move choke lever located on engine to "START" position. You do not need to choke a warm engine.
(For electric start move to step (8))
7. For recoil start only - Pull the starter cord slowly until resistance is felt and then pull rapidly to
start engine.
8. For electric start only - Flip the engine switch to the START (ll) position for a few seconds and
then release.
9. Do not over-choke. As soon as engine starts and warms up, slowly move the choke lever to the
RUN position.
English
3 sec.
17
Customer Service: 1-844-FIRMAN1
Hide quick links:
Advertisement
