Advertisement
PROGRAMMING INSTRUCTIONS
STEP 1 – Connection of devices
Wire the Bromic Smart-Heat
BLACK (-) wires ensuring correct polarity.
5VDC adaptor and RS232 cable/RS232 convertor are not supplied byBromic.
BROMIC
SMART-HEAT
Connect the Bromic Smart-Heat
RX232 convertor.
Check the connections before plugging in the power supply and turning on.
If using a USB to RS232 convertor for the first time, install the USB driver by following the
instructions supplied with the USB product.
Link to a 5VDC supply, by connecting the RED (+) and
TM
TO BE INSTALLED BY HOME INTEGRATOR
Power input lead
Black: Ground
Red: 5VDC
LINK
TM
RS232
Link DB9 to the PC via the COM port or to a USB to
TM
Antenna
bromic.com
5V DC Power Adapter
7
Advertisement
