Advertisement
TROUBLESHOOTING
It is recommended that all button operations are confirmed using the device connected
to a PC before integration of commands to a Home Automation System.
The Docklight
command window is a useful tool to confirm the Bromic Smart-Heat
Link is
TM
©
transmitting, receiving commands and any error codes that are generated.
Refer to the Bromic Smart-Heat
Link protocol document for command debugging. The
TM
error definition table is shown below
IF THE PAIRED REMOTE DOES NOT WORK WITH THE CONTROLLER, THE Bromic
Smart-Heat
Link TROUBLESHOOTING STEPS IN THE TABLE WILL NOT WORK. In this
TM
case, troubleshoot the controller and remote devices using the instruction manual supplied
with the controller
14
bromic.com
Advertisement
